It is safe enough to say that the maintenance that comes along with owning a pool is not cheap. One of the procedures that come along as a part of maintenance is the concrete pool’s resurfacing.
Resurfacing of the pool involves a process of replacing the plastic that was placed on your swimming pool during its initial installation with a tile, plaster, or even sealant. This process comes with plenty of benefits that include extending the pool’s life, keeping the pool clean, and improving the pool aesthetics.
Though the cost to perform this service may burn a hole in your pockets, resurfacing your concrete pool is mandatory and must be conducted once in 10 years at least.
Standard Cost of Resurfacing a Pool
The region in which the pool is located is a major deciding factor on the service’s pricing. The price range of resurfacing is quite big, but you can assume that it would cost around $1500 to $100000. Now, this is an estimate based on the standards of the market, which deems that resurfacing every 1000 square feet costs $7000.
The grand total is estimated by considering both the cost of the materials used as well as the labor required to accomplish the task.
The laborers offered by experts usually get paid on an hourly basis, and that costs around $45 to $65 per hour. However, a contractor would be able to offer you a better deal by getting the resurfacing done at the rate of $3000 within the span of a week or two.
The cost of materials exceeds the cost of the procedure itself. The cost of the materials can be of varying costs and depend on their availability in the market. A good example to back that up would be that of a $1,000 regular designing tile that could increase in value up to $50,000 due to its certain new features.
In-ground vs. Above-ground restoration
Source: riverpoolsandspas.com
According to Poolresurfacingchandler.com, resurfacing of the pool can be either performed in-ground or above ground. However, if you have an inground pool, remember that it is going to be more costly than the above-ground restoration.
You usually get charged about 10$ for an above-ground pool to patch, while for an inground pool, it comes up to around $20 to patch. This indicates that the average cost to make an above-ground complete replacement would come up to $1,700, while for an in-ground complete restoration, the average price would come up to $5,000!
But at the end of it all, the type of pool is an essential deciding factor in the pricing because you do not really have the option of changing the type of pool once it is built!
Resurfacing a concrete pool
Unlike some other materials such as fiberglass, concrete pools endure wear and tear quite often, and it is imperative to replaster it frequently. An approximate value on how much the resurfacing of a concrete ensemble costs would be $10,000 on the lower end of the price range. These finishes would ensure that your pool is sealed as well as safe and at the same time do an excellent job in improving their look and finish.
Paint
Source: thepooladvisors.com
Painting the pool comes with choosing among factors such as color options, styles, budget range, etc. The price of getting the concrete painted usually is about $1500 on the lower end and involves covering cracks or repairs that can be fixed by plastering. The cost will increase if the damages done to the outer coat of the pool are extreme.
Plaster
Source: drewnowskipools.com
Choosing between plaster and paint is a constant hot debate topic, with the arguments favoring the former. Plastering a medium-sized pool can be wrapped up within the range of $7,000-$10,000. That being said, the prices would definitely increase with the size of the pool.
Minor plastering repairs can be done without professional assistance. Aging plaster or stained plaster could result in reducing the aesthetic of the pool. Damaged plaster is a brutal consequence of acid washing, or even being in the presence of poor quality water has severe impacts on the plaster. So make sure you get a professional to step in and handle the situation.
Aggregate
Source: imagineaz.com
Aggregate finishes are a direct reflection of the aesthetics that the owner desires to have. This could include replacing a bland pool with pebbles, quartz, shells, or even glass beads.
Aggregate plaster that is utilized in the pools can vary in price drastically and depends highly on the material requested. Diamond Brite, a very prominent brand in the industry, and go to the extents of quoting their prices as high as $5,000 for every project while other high-end entities like BeadCrete, Pebble Tec, and even PebbleSheen lie in the price range of $9,000 that could go up to $13,000.
Even though the price range may be quite high, the high quality makes up for the expenses as they comfortably last for more than a year with minimal maintenance interference.
Tiling
Source: aquazonepools.com.au
Tiles have always been chosen to add a decorative touch to the concrete pools. Simply replacing the tiles doesn’t demand professional help, and neither is it a cumbersome task.
Tiling for the first time can be a little hard on your pocket as it might cost around $30000 or more. This is predicted on the estimate that each square foot of porcelain tiling costs $4 and ceramic tiling costs $6. Glass tiles are the most extortionate ones. They usually cost around $25 per square foot.
However, accent tiling is a wallet-friendly alternative. Giving a paint or plaster finish to the pool’s underground regions and beautifying the visible parts with striking tiles can be considered a smart choice.
Conclusion
Pools call as summer sets in. Everyone wishes to get themselves pampered with the cool water of the pool and beat the summer heat. But before you do so, make sure to resurface your concrete pools so that your safety doesn’t get compromised. And if you think getting your pool revamped is impossible on your own, get in touch with an experienced company to get your concrete pool resurfaced at the earliest!
