Junior XDA Linux4 member ported custom TWRP recovery (v3.4.0-0) to a Samsung Galaxy Tab S6 Lite SM-P610/ P615 tablet. After flashing TWRP, you can flash the latest Android 10 based on LineageOS 17.1 ROMs, with the exception of various mods or custom ROMs. However, as this is an early form of TWRP recovery, some characteristics are not stable or do not function as expected. This list includes the fact that sideloading of the ADB is completely stopped and that decoding of data on the storage ROM is currently not supported.
If you own a Samsung Galaxy Tab S6 Lite SM-P610/ P615 tablet and you want to customize this tablet as well, then you have come to the right place. If you are an Android enthusiast and want to install a root and TWRP recovery on your favorite computer, you are on the right page. In the near future, we will guide you through the installation of TWRP and Samsung Galaxy Tab S6 Lite SM-P610/P615 root.
The TWRP is designed from materials and has an attractive user interface (UI). This guide will help you install the latest TWRP for the Samsung Galaxy Tab S6 Lite SM-P610/P615. You can download TWRP Recovery via the links in the foreword of this article. Please note that this is an official TWRP repair and only for the Samsung Galaxy Tab S6 Lite SM-P610/ P615 (Confirm the model by going to Settings > Above menu). The process described below is only for routing and installing TWRP on a Samsung Galaxy Tab S6 Lite SM-P610/P615, do not try this method on any other device.
If you want to exploit the full potential of your Samsung Galaxy Tab S6 Lite SM-P610/ P615 hardware, the most important task is to run a root and flash TWRP. Replacement ROMs often have limited and unsupported adaptation functions. If you have both a root device and a flashed TWRP recovery, you are free to install a custom ROM, modules, kernel, Xposed, etc., as well as many applications that need root access to function properly.
ALWAYS WRITE how to run a Samsung Galaxy A 10.1 SM-T515/T510 tablet and install TWRP recovery.
Brief description and benefits of TWRP Recovery
TWRP (Team Win Recovery Project) – open source community development project. With TWRP firmware, your device is able to install any custom firmware, install the tablet root firmware, define module zip files for settings, define Xposed modules for custom functions, click root processes and expand processes. You can also make a full backup of Nandroid and restore it later with a single click, delete the image file, remove bloatware, overlock and underclock. TWRP allows you to easily clean up the cleanup, cache and data after flashing an image file to display changes and correct minor errors caused by caching.
To install the TWRP Samsung Galaxy Tab S6 Lite SM-P610/ P615, the tablet must have an unlocked starter charger. This means that you must first unlock the bootloader for the main control of the device and make all settings.
Exclusion of liability : AndroidWeblog.com covers everything, albeit in a very neat way, so that our readers get exactly what they want, but there is still a modest chance that the most important questions that may arise here will be answered. It is therefore in the user’s interest to follow the instructions very carefully in order to avoid problems with your device.
Routing and flashing the custom ROM firmware will undoubtedly void your device’s warranty, and AndroidWeblog.com is in no way responsible for an invalid warranty or the brand of the device.
Building
Check the model number of the model you want to use:
- Samsung Galaxy Tab S6 Lite SM-P610/P615 [models : [SM-N980F, SM-N980F/DS]
You must ensure that you have read the disclaimer carefully before tearing off the tablet and agree to take further risks.
The tablet must be 70% loaded, otherwise complications may occur during experiments. Why take the risk and try to fully charge them?
If you want to install the tablet as a root or with a custom ROM, it’s a good idea to backup the tablet. Back up all your media – photos, videos and more – to your PC and contacts in the cloud.
You need to enable the USB debugging option by going to Settings, Applications and Developers.
Routing Downloads Samsung Galaxy Tab S6 Lite SM-P610/ P615
You can download Samsung drivers here (if you already have drivers installed on your PC, you can ignore this).
ALWAYS learn to repair the root of Xiaomi Mi A3 and install TWRP Recovery.
Download Odin from here.
Download TWRP Restore for the Samsung Galaxy Tab S6 Lite SM-P610/ P615 from here
TWRP Restore 3.4.0 (link will be updated soon)
Download Chainfire SuperSU from here.
Unlocking Starter charger Samsung Galaxy Tab S6 Lite SM-P610/ P615B
Step one: Make sure you already have the USB debug mode and OEM unlocking enabled on your tablet. To do the same, simply go to Settings > About > and click Assembly Number 7 to 10 times in a row, which will activate USB debug mode and OEM unlocking. So it is clear that the process is not complicated.
Step two: Then just turn off your Samsung Galaxy Tab S6 Lite SM-P610/ P615. Now it’s time to enter boot mode. To enter the boot mode, press the Volume + and Volume – buttons simultaneously and connect the tablet with a USB data cable. When the device enters boot mode and the boot screen appears on the screen, simply press the Volume up button to unlock the Samsung Galaxy Tab S6 Lite SM-P610/ P615 boot charger.
Attention: The start-up charger unlocking process removes user data from your device. After configuring the device, check the OEM unlock in the settings, in the rear cases it will be locked again.
Steps to flash/install TWRP 3.4.0 on the S6 Lite SM-P610/P615 tabSamsung Galaxy
Step one: Suppose you have already downloaded the latest version of Odin and TWRP Recovery for your device from the above preliminary section. If the latest version of Odin does not work on your device or if you have problems, just download the correct version of Odin.
Step two: Make sure you have already downloaded TWRP Recovery for your Samsung device. Just unpack the compressed Odin file from your computer and install the latest Samsung USB drivers on your computer.
Step three: When the device is turned off, simultaneously press the Power+Volume Down+Home button and the device enters the start-up mode. If this key combination does not work for your device, you can simply google this key combination for your device.
Step four. Now connect your Samsung device to your computer using a USB cable. Then navigate to the folder where the Odin files were extracted, right click on the Odin executable file and click on Run as Administrator.
Step five: The interface should display something like ID:COM below, and check the interface below carefully.
Step 6 : Search for ID:COM and below it an empty space that turns blue when the device is detected. The device must be recognized if the correct drivers are installed on your computer.
ALWAYS WRITE how to run a Samsung Galaxy A80 SM-A805F and install TWRP recovery.
Step seven: Then just click AP, go to the firmware archive, find the .tar.md5 file and select it after clicking AP.
Pay attention: The resection has a PIT section. Do not put a file in the PIT section and make sure that Repartitioning is not checked. Tick the box and check the Auto restart and F boxes. Saves time.
Step 8 : Once the TWRP (.img) file has been downloaded in the AP section, the process can start the firmware or installation. Be careful not to touch the USB cable while it is flashing.
Step nine: If all goes well, you will see a green PASS or RESET message at the end indicating that the TWRP firmware process for your device has been successfully completed and is now in TWRP recovery mode. At this point, the device restarts automatically, don’t panic, it’s normal. You can now disconnect the device from your computer.
Procedurefor the Samsung Lite SM-P610/ P615 Galaxy S6 Tablet Ruth on Android 10/ Magisk or SuperSUInstallation
Check if you have downloaded SuperSU or Magisk Manager (link in the required section of this article) Then continue climbing the stairs.
Pay attention: You can use Magisk Manager or Super SU, but only one, so choose well. Log in to Magisk Manager if you’re not sure.
Step one: Transfer the downloaded SuperSU or Magisk Manager file to the internal memory / SD card of your Samsung Galaxy Tab S6 Lite SM-P610/ P615 tablet.
Step two: All you have to do now is charge for the repair. An additional backup of the ROMs can be made via the TWRP interface. Nevertheless, I advise you to support the ROM. Because if the process fails, you can make the ROM blink.
Step three: Touch Install, then go to SuperSU.zip or magisk.zip and rotate your finger over the firmware confirmation file (at the bottom of the screen). The Magisk/SuperSU flash process has started and will take a few seconds.
Congratulations, you now have the roots of the Samsung Galaxy Tab S6 Lite SM-P610/ P615 and the TWRP. You can now install the Xposed frame and configure the tablet according to your needs. If you want to check, you can download and check the root status using the Root Checker application.
